Gondola Shelf Dividers

Shelf Fencing and Dividers for Lozier and Madix Gondola Shelving

As depicted above. Create a wire binning system with Front Fences and Dividers for Base Shelves and Upper Shelves.

Fences and Dividers available for all shelf depths and heights of 3" high and 6" high.

Dividers and  fences have tabs attached to the bottom of the divider or fence that that interlock onto the top of an existing shelf.

Fences and shelf dividers may be used independent of each another.

The typical perforations on a shelf are either diamond shaped or the standard round shaped holes.

Chrome or zinc plated finish.

Available for all lengths and depths.

Gondola Front Fencing with a 30 Degree Down Slant Shelf

Using a standard upper shelf with a three inch high front fence provides merchandising and a display for most small impulse items like potato shops, boxes of candy, and gum for any small store setting.

Look closely at the image on the left you will see a standard upper shelf with a three inch fence.  Any standard upper shelf can be placed at either a flat position, a 15 degree position, and a 30 degree position.

---

Wire PMF Front Fences

The Wire Truss PMF Front attaches to either the Madix or Lozier Standard Base or Upper Shelf, and it serves as an option for shelf retainers and wire fronts. The Wire Truss PMF Front attaches into the shelf perforations using the supplied pine cone clips.

It offers product retention while affording a high-end look throughout the area of the store. The 7/8" tall WTPMFF may complement Madix Wire Truss Shelves, which also have the "zigzag" wire pattern.